Gulf oil disaster: Tests warned of cement problems before well’s blowout

Weeks before the Deepwater Horizon explosion, oil company BP and subcontractor Halliburton were aware of test results showing that the cement mixture designed to seal the well was unstable — but they used it anyway, President Obama’s special commission investigating the environmental disaster reported Thursday.

The findings shed new light on troubles with the cement job on BP’s Macondo well in the Gulf of Mexico, which exploded April 20, killing 11 workers and causing the largest offshore oil spill in U.S. history. The cement is supposed to secure the well pipes and keeps oil and gas from flowing up the well.

Legal experts said the information could bolster plaintiffs’ cases in the multitude of spill-related lawsuits by helping to show that BP acted with gross negligence leading up to the spill. This could, among other issues, greatly increase the multibillion-dollar penalties BP might have to pay for violation of the Clean Water Act.

“There’s no question that it’s important evidence,” said Charlie Tebbutt, an attorney for the Center for Biological Diversity, which has filed a lawsuit seeking $19 billion under the Clean Water Act. “It serves to confirm the previous reports of significant problems with the exploration and production of the well.”

The information was included in a letter to Obama’s commission by Fred. H. Bartlit Jr., its chief counsel.

David Uhlmann, a law professor at the University of Michigan who formerly headed the Justice Department’s Environmental Crimes Section, said the findings make it appear more likely that Justice officials will file criminal charges not only against BP and Transocean Ltd., the rig’s owner, but also against Halliburton, the Texas oilfield services giant once headed by former Vice President Dick Cheney.

“There have been questions all along about the integrity of the cement job, and today those questions loom larger and are closer to being answered,” Uhlmann said. “And those answers are not good ones for Halliburton.”

In the letter, Bartlit said that his team recently asked Halliburton to turn over samples of the cement materials like those used at the well. The materials were tested by Chevron employees at a Houston lab. The employees were “unable to generate stable foam cement” from the materials, meaning the cement would not be strong enough to keep the well sealed.

Bartlit then asked Halliburton to turn over all of the tests it had run on the mixture.

Those documents showed that Halliburton had conducted four “stability tests” of the mixture. The first two were run in February 2010 using a slightly different recipe than the one eventually used at the well. Both of these tests indicated that the mix was unstable.

Halliburton sent results from only one of those tests to BP in an e-mail March 8.

“There is no indication that Halliburton highlighted to BP the significance of the foam stability data, or that BP personnel raised any questions about it,” Bartlit wrote.

Two more tests were conducted by Halliburton in April. The first test, conducted about seven days before the blowout, again showed the mix to be unstable, although Bartlit said it may have been improperly conducted. These results were reported internally at Halliburton, Bartlit said, “though it appears that Halliburton never provided the data to BP.”

Bartlit said Halliburton apparently began a fourth test, and after modifying the testing procedure, found the cement to be stable.

“We are not yet certain when Halliburton reported this data internally or whether the test was even complete prior to the time the cement job was poured at the Macondo well,” he wrote. “Halliburton reported this data to BP after the blowout.”

Bartlit said that because BP did not have the test results, “the cement job may have been pumped without any lab results indicating that the foam cement slurry would be stable.”

BP officials did not return a call for comment Thursday. A Halliburton spokeswoman said company officials were reviewing the report.

Late Thursday, Halliburton issued a statement. Its February tests were of a different slurry mixture, the company said, and its first April test was “irrelevant because the laboratory did not use the correct amount of cement blend. Furthermore … BP was made aware of the issues with that test.”

Halliburton said its second April test used the agreed-upon mixture and showed it was stable. But BP changed the mixture that was actually used in the well, Halliburton said, and “a foam stability test was not conducted” on the new formulation.

The cement job was not the only problem that plagued the well on the evening of April 20, and Bartlit did not say that it was the only cause of the blowout.

The blowout preventer — a massive device that was supposed to shut off the well off in case of a dangerous geyser of oil and gas — also failed. Other human errors have been alleged as well. On the day of the blowout, BP canceled a test called a “cement bond log” designed to discover cement defects, saving more than $100,000.

Jesse Gagliano, a Halliburton technical advisor, also told federal investigators that BP risked causing a “severe gas flow problem” when they decided to use fewer devices called “centralizers” rather than the 21 he recommended.

Critics of BP and its partners on the Macondo project jumped on the findings to demand greater oversight of the companies involved in the accident and of the oil industry. Rep. Edward J. Markey (D-Mass.), chairman of the House Energy and Environment Subcommittee, said the counsel’s findings underscored the need for BP’s new chief executive, Bob Dudley, to appear before Congress, which he has recently declined to do.

“The fact that BP and Halliburton knew this cement job could fail only solidifies their liability and responsibility for this disaster,” Markey said in a statement. “We now know what BP and Halliburton knew, and when they knew it. And now we know they did absolutely nothing about it.

The report’s release sent Halliburton shares plunging 16%, to less than $30 in New York trading, but it recovered somewhat to close at $31.68, down $2.74, or 8%. BP’s American shares, however, closed at $40.60, up 1.25%.
Source: LA Times

Leave A Reply

Your email address will not be published.